AlkaTide Official Website › Verify A Batch
Verify Your AlkaTide Batch: Lot ALK-26/AL-1149
Quick answer: the AlkaTide stock shipped from this desk is lot ALK-26/AL-1149, Certificate of Analysis reference ALK-1149-26-AL. The lot and best-before are printed on the base of the bottle where the bottle carries them. If yours does not match, call +1 (302) 200-3480 with the code and your order ID.
Read the caution below before you read anything else on this page. It changes what this exercise proves.
What this page is not. The lot and CoA reference above are the batch identifiers for stock held at this desk. They are not a laboratory report, and we are not going to publish a letter we did not commission or a licence we do not hold. If you need a certificate of analysis for a specific bottle, ask the order desk on +1 (302) 200-3480, and if we cannot supply one, we will tell you that rather than produce something that looks like one.
How to check an AlkaTide bottle in two minutes
Turn the bottle over
The lot code and best-before date are printed on the base where the bottle carries them. If your bottle has no code at all, that is worth a phone call.
Compare the panel
Apple Cider Vinegar 250 mg, then cane sugar, glucose syrup, water, pectin and citric acid. Six named items, one of them active. A different panel is a different product — see the ingredients page.
Call the desk with the code
+1 (302) 200-3480, with the lot and your order ID. They can match it against what was shipped. This costs nothing and takes a few minutes.
| Reference | Value | Where it appears |
|---|---|---|
| Lot | ALK-26/AL-1149 | Base of the bottle, and the top bar of every page here |
| CoA reference | ALK-1149-26-AL | Held by the order desk against this lot |
| Best-before | Printed per bottle | Base of the bottle, beside the lot |
| Distributor | Alkatidedaily | 140 Broadway, Floor 21, New York, NY 10005, USA |
| Returns | — | 1 New York Plaza, Floor 18, New York, NY 10004, USA |
If your AlkaTide bottle does not match
A different lot code
Not automatically a problem — lots change as stock rotates. Call with the code and the desk will confirm whether it was one of ours.
No lot code at all
Call before you take any of it. A bottle with no batch identification cannot be traced by anyone, including the manufacturer.
A different ingredient panel
Six named items with apple cider vinegar at 250 mg. Anything else is a different formulation and should be checked before use.
Bought somewhere else
We will still check the code for you. We cannot refund it — only orders placed here carry the 60-day guarantee described on this website.
What an AlkaTide lot code is, and why it exists
A lot code identifies one production run — one batch of gummies made from one set of raw materials on one day, on one line. Everything made in that run carries the same code, and nothing else does.
It exists for one reason: so that a problem found in a single bottle can be traced back to everything made alongside it. If a raw material turns out to be wrong, the lot code is what turns “somewhere in the last six months” into a specific list of bottles. Without it there is no recall mechanism at all, only a guess.
That is also why a bottle with no lot code is worth a phone call before you take any of it. It is not automatically counterfeit — printing does fail, but an untraceable bottle cannot be checked by us, by the manufacturer, or by a regulator.
What AlkaTide batch records can and cannot prove
| Question | Can a lot code answer it? |
|---|---|
| Did this bottle come from stock this desk shipped? | Yes — that is exactly what it is for |
| Was it made in the facility named on the label? | Yes, the code ties to a production run |
| Is it within its best-before date? | Yes — printed beside the lot |
| Does it contain 250 mg of apple cider vinegar? | No. That is what the panel states, not what a code proves |
| Has this specific bottle been assayed? | No. No individual bottle is |
| Does the product work? | No. Nothing about traceability speaks to efficacy |
The bottom three rows are the ones that matter. A batch reference is a supply-chain fact, and supply-chain facts are routinely presented in this category as though they were evidence about a formula. They are not, and we are not going to let ours do that work.
What to do if an AlkaTide bottle looks wrong
Four things worth checking on arrival, and what each one means.
| What you see | What it usually means | What to do |
|---|---|---|
| Seal under the cap broken | Damage in transit, or tampering | Do not take it. Call the desk the same day |
| Gummies fused into one mass | Heat during shipping or storage | A quality failure. Call. It is ours to replace |
| Label print differs from this website | A newer or older label revision, or not our stock | Call with the lot code before taking any |
| Count is not 30 | A filling error | Call. Do not try to make it up from another bottle |
None of these is common and all four are worth a phone call rather than a shrug. +1 (302) 200-3480, with the order ID and the lot code from the base.
What the AlkaTide best-before date means
It is a quality date, not a safety cliff. It is the manufacturer’s statement of how long the product holds its stated specification under the storage the label asks for — cool, dry, closed, out of sun.
Past it, a gummy is more likely to have hardened or lost potency than to have become harmful. That said, we would not suggest taking a supplement past its date: you no longer know what the number on the panel means, which was the reason to choose this label in the first place.
Where the AlkaTide lot code is printed
On the base of the bottle, alongside the best-before date, where the bottle carries them. It is usually inkjet-printed rather than part of the label artwork, so it can be faint on a dark surface — tilt it toward a light before concluding it is absent.
How often the AlkaTide lot changes
Whenever stock rotates, which is not on a schedule we can publish in advance. The lot named on this website and in the top bar of every page is the one current at our last review; a bottle arriving with a different code is normal rather than suspicious, and the desk can confirm it in a phone call.
What would be worth a call is a lot code that the desk does not recognise at all, or no code on the bottle. Those are the two cases the check above exists for.
Why Alkatidedaily publishes a lot number at all
Most websites in this category do not, and the reason they do not is that it creates an obligation. A published lot is something a buyer can hold you to: it says this desk shipped this stock and can be asked about it.
It also has a limit that we would rather state than let you infer. A lot number proves provenance, not quality. It tells you where a bottle came from, not what is in it. The things it cannot establish are in the table above, and the analysis gaps for this product are listed on the testing and quality page.
Storage, the best-before date and your AlkaTide bottle
The best-before date assumes the storage the label asks for: cool, dry, out of direct sunlight, closed. A gummy is more sensitive to heat than a capsule — pectin softens, and a bottle left in a hot car can arrive as one mass rather than thirty pieces. That is a quality failure even though nothing about it is unsafe.
Practically: keep it indoors, away from a windowsill and away from the stove, and keep the cap on. If a bottle arrives soft after a hot-weather delivery, call +1 (302) 200-3480 rather than working around it. That is a shipping problem and it is ours.
AlkaTide lot ALK-26/AL-1149, traceable to this desk.
Ordering here is what makes a batch checkable and a refund ours to honour.
$294 for six bottles at $49 each
Order AlkaTide On The Official WebsiteFree US shipping · six digital bonuses · 60-day money-back guarantee · lot ALK-26/AL-1149